Tripp Lite B072-032-IP4 Manual

next previous

1. Product Overview

To set the IP address via the Web Conguration Interface:

Note:

• Before logging on the ﬁrst time, verify that you have the latest Java installed on your computer (Java 1.6 or higher is required). If not, you

can download and install Java from http://www.java.com/en/download/index.jsp.

• Only SSL connections are allowed, so you must start the IP address with HTTPS, not HTTP.

1. Open your web browser (see the Client Computer Compatibility section of this manual for browser support) and enter in the IP address

of the KVM.

2. WhenloggingintotheKVMfromyourwebbrowser,aSecurityAlertmessageappearstoinformyouthatthedevice’scerticateisnot

trusted,andasksifyouwanttoproceed.Youhavetwooptions:

• If you are working on a computer other than your own, accept the certiﬁcate for just this session by clicking to proceed.

• If you are working at your own computer, install the certiﬁcate. Refer to the Security Certiﬁcate Installation section for further

instructions.

3. Uponinstallingthecerticateoracceptingtheunrecognizedcerticateforthecurrentsession,theinitialwebpageappears,andthe

Javaapplicationislaunched.Beforetheinstallationcompletes,asecuritywarningmayappearstatingthattheconnectiontothis

websiteisuntrusted.ThisisasecurityissuesimilartooneyougetfromyourWebbrowser.Youcanchoosetocontinueanyway,orinstall

thecerticateintheJavacontrolpanel.RefertotheSecurity Certiﬁcate Installation section for further instructions.

4. AftertheJavaapplicationislaunched,theloginpageappears.Iftheloginpagedoesnotappearonitsown,clicktheLog On button in

the center of the web page to bring it up. If clicking on the Log On button does not bring up the login page, add /targets.jnlp to the end

of your IP address.

5. Enter in your username and password, and press Enter. If this is the ﬁrst time you are accessing the KVM, enter in the default

username (admin) and password (access). The My Targets page of the Web Conﬁguration Interface opens, showing the state of your

unit, and displaying all your available Target Servers.