Network Installation ColorQube™ 9201/9202/9203
5-30 System Administrator Guide
•Transform SCS to ASCII: *YES
• Manufacturer type and model: *IBM42011 ***SEE NOTE BELOW***
• Workstation customizing object: xxxxxxxx (leave as default)
•Library: xxxxxxxx (leave as default)
• Internet address: xx.xxx.x.xx (IP address of printer)
• VM/MVS class: *SAME
• Forms control Buffer: *SAME
• Destination options: XAIX
• Text description
• Display any file: *NO
•Job separators: 0
• Operator controlled: *YES
• Data Queue: *NONE
•Library:
• Authority to check: *DTAAUT
2. Press [Enter] to create.
Note
The Workstation Customizing Object is the file that was created in the Create a Device Description on
page 5-28 step 2.
3. At this point, a spool file (document) should be able to be sent to the ColorQube device.
Note
If printing PCL, set this parameter to HPIIID, HP5Si (most of the HP drivers will work) and set
Workstation customizing object as *none.
If printing ASCII, set this parameter to *IBM42011 (which is the default).
