A-9
Cisco Content Services Switch Adminisitration Guide
78-13885-03
Appendix A Upgrading Your CSS Software
Upgrading Your CSS
Note The script will not offer to delete a version that you have configured
as the primary or secondary boot file. On a flash disk-based system,
you may need to quit and then deselect the primary or secondary boot
file before continuing with the upgrade.
4. If necessary, remove the ADI.
• Enter y to remove the displayed ADI version.
• Enter n for the script to display another version to remove.
• Enter q to exit from the script.
remove sg0710001 [y n q]? y
Attempting to delete sg0710001
5. At the prompt, enter the file name and extension of the GZIP-compressed
ADI version to install, and verify the information you entered. For example:
Please Enter Version to Install:sg0710002.adi.gz
Note If you are using an uncompressed version of the ADI from the FTP server,
include the adi file extension (for example, sg0710002.adi).
Upgrade to Version sg0710002? [y n q] y
6. Determine whether to set the ADI as the primary boot-file.
• Enter y to set the ADI as the primary boot-file and change the CSS
configuration.
• Enter n to keep the same primary boot-file configuration.
Set primary boot-file to Version sg0710002? [y n q] y
7. Determine whether to have the CSS reboot with the ADI you are installing.
• Enter y to reboot the CSS with this ADI after the upgrade is done.
• Enter n to not reboot the CSS with the ADI after the upgrade is done.
Reboot with Version sg0710002? [y n q] n