Filter
Top Products
Stacking Units 29
3
Connect the Matrix Cables, as shown in Figure 10:
a
Connect a Matrix Cable to the port marked Unit 1 on the Matrix
Module. Connect the other end of this cable to the matrix port of the
Switch that contains the Matrix Module.
b
Connect a second Matrix Cable to the port marked Unit 2 on the
Matrix Module. Connect the other end of this cable to the matrix port
of the second Switch.
c
Repeat steps
a
and
b
for any additional Switch units.
Figure 10
A stack of multiple units
16950ua.bk Page 29 Thursday, August 27, 1998 11:55 AM