3Com 3644A Power Supply User Manual


 
3600 Series Programmable Power Supply
VERSION 2.0 2004.6
16
3600 SERIES USER MANUAL
Chapter 3 System Installation of PowerMS Software
3. 1 System Installation
3.1.1 Put the disk into the CDROM driver. Then select the setup powerMS and the initial diagram as in Fig.
3-1 will be displayed.
Fig 3-1 The Installation Initial Interface
3.1.2 Then it will enter the interface as in Fig. 3-2. Press “NEXT” to continue.
Fig 3-2 The Installation Interface 2
3.1.3 In Fig. 1-3, there is some explanation to some products’ introduction. Read it and press “YES” to
continue, otherwise there will be no way to install.
Fig 3-3 The Installation Interface 3
3.1.4 In Fig. 3-4, click “BROWSE” to select installation directory path. The default directory path is “C:
\Program Files\Array\PowerMS”
Fig 3-4 The installation Interface 4