3Com 3644A Power Supply User Manual


 
3600 Series Programmable Power Supply
VERSION 2.0 2004.6
22
3600 SERIES USER MANUAL
POWER ON/OFF Set POWER Control Set
Fig 4-10-2 Selecting Control Instruction
There are two methods to set the voltage range: one is by using the rotary button and the other is by using
the keypad (0.004~36.000). If you want to set accurately, please use the keypad.
Fig 4-11 Using the Rotary knob Fig 4-12 Using the Keypad
1) Using the rotary knob: Move the mouse to the icon and then rotate the knob.
2) Using the keypad: Select the “V” button, enter the data and then select the “ENTER” button.
There are two methods to set the voltage range: one is by using the rotary knob and the other is by using the
keypad. If you want to set accurately, please use the keypad. In general, you can use the rotary knob.
1.) Methods 1
As in Fig. 4-11, there are four control instructions in total.
CLOSE POWER : Close the power output OPEN POWER : Open the power output
PC CONTROL : ontrolled by PC POWER SELF : Control by power supply
Fig 4-10-1 Select the Control Instruction
2.) Methods 2
4.6 Select PC to POWER Control Instructions
Explanation: The system default control instruction is the PC CONTROL state. And when the system is
closed or the POWER is switched, the system will be automatically set to POWER SELF state.
4.7 Set the Voltage Range
4.8 Set the Max Current