Connecting Through the Com Port 61
Connecting Through the Com Port
Instead of using an IP address to configure the Access Point a
Null modem cable, connected to the RJ-45 Console Port, can be
used.
In your terminal settings ensure that the following configuration
is met:
■ Bits per Second – 15200
■ Data Bits – 8
■ Parity – None
■ Stop bits – 1
■ Flow Control - none
Once connected enter the user name and password. The default
values are as follows:
■ Username: admin
■ Password: password
Once logged in, type”?” for a list of commands.