Filter
Top Products
64 Diagnosing Problems
2 Return to the 3Com Wireless Infrastructure Device Manager
and click Refresh.
3 Select the device and click Configure to start a new
configuration session and set its IP address.
Symptom
The Wireless Network Tree does not appear in the 3Com Wireless
Infrastructure Device Manager window.
Solution
Verify that you are using the correct network adapter. In the
device manager window, click Choose NIC. Select the network
adapter for the network you want to scan, and click OK.
Symptom
The Access point has a yellow exclamation point (!) next to it in
the Wireless Infrastructure Device Manager.
Solution
The Access Point is on a different subnet than the computer
attempting to configure it. To recover from this situation and
continue configuring the Access point:
1 Close your browser.
2 Return to the 3Com Wireless Infrastructure Device Manager
and click Refresh.
3 Select the device and click Configure to start a new
configuration session.