Filter
Top Products
Configuring the 3C882 ISDN Modem for a PC 3-9
SPID(s) are configured, clicking on the 3ComImpact IQ globe
icon will thereafter display the Configuration dialog box.
If you add a second telephone number to your ISDN line
after you run the SPID Wizard, you can use the SPID Wizard to
detect the SPID for your second telephone number.
To run the SPID Wizard for a second telephone number:
1 From the Configuration dialog box, check the Enabled box
located in the Number 2 group box.
A message box appears and asks you to confirm that you
want to run SPID Wizard.
2 Click OK.
The Second Telephone Number dialog box appears.
3 Enter the second telephone number for your ISDN line
and then click Next.
Figure 3-8 appears.
4 Click Finish.
Configuring Multilink PPP
Multilink PPP is a protocol that provides a method for
combining multiple PPP connections. Multilink PPP combines
the two ISDN B channels, creating a virtual single digital
connection of up to 128 Kbps. Note that the destination you
are dialing must also support Multilink PPP, or you will get a
single B channel connection instead of the dual-channel link.
By default, Multilink PPP is enabled. To enable or disable
Multilink PPP, do the following:
1 Click inside the Multilink check box in the PPP area to
clear it (disable) or check it (enable).
2 Click the Update button to download the change to your
3C882 ISDN modem’s S register.