Filter
Top Products
Setup Using Windows 95 3-15
Setup Using Windows 95
This section describes how to set up the 3C882 ISDN modem
using Windows 95 Plug and Play. These instructions assume
that Windows 95, Microsoft Plus!, and the 3C882 ISDN
modem software have already been installed.
To setup your 3C882 ISDN manually and bypass Windows 95
Plug and Play, refer to the section “Setup for Windows NT 4.0”
below.
1 Reboot your PC with the 3C882 ISDN modem powered up
and physically connected to your PC.
The New Hardware dialog box appears, shown in Figure 3-13.
Figure 3-13 New Hardware Dialog Box
2 Select the Driver from disk provided by hardware
manufacturer option.
3 Click OK.