Filter
Top Products
90 CHAPTER 5: ROUTER CONFIGURATION
Figure 61 The SNMP Screen
Click Enable/Disable to enable/disable the agent.
To Configure the SNMP:
1 Type the Read Community, which is the password for the incoming Get
and GetNext requests from the management station.
2 Type the Set Community, which is the password for incoming Set requests
from the management station
.
3 Type the System Name for the program.
4 Type the System Location for the program.
5 Type the System Contact for the Contact person’s name.
6 Type the IP Address of the station/device for sending your SNMP traps
to.
7 Click Apply.
UPnP Universal Plug and Play (UPnP) is a distributed, open networking standard
that uses TCP/IP for simple peer-to-peer network connectivity between
devices. UPnP compatible devices can dynamically join a network and
learn about other devices on the network. UPnP hardware will be shown
in the Network Connections folder in Windows XP.