Filter
Top Products
28 CHAPTER 2: INSTALLING AND CONNECTING A WX SWITCH
MAP Cable Requirement
Use a straight-through Ethernet cable to connect a MAP access point
directly to a WX switch or indirectly through another device.
1000BASETX Gigabit Ethernet Cable Wiring Use Cat 5 Enhanced
(Cat
5E) or better cable. 1000BASE-TX uses all 8 wires in the cable. The
wiring can be straight-through or crossover. The port automatically
configures its pin signals accordingly.
PoE is not supported on 1000BASE-TX links. All wires in the cable are
used for data.
Table 9 10/100 Ethernet Straight-Through Pin Signals
WX Switch Other Device
Pin Function Pin Function
1 RD+ 1 TD+
2 RD- 2 TD-
3 TD+ 3 RD+
4 PoE+ 4 PoE+
5 PoE+ 5 PoE+
6 TD- 6 RD-
7 PoE- 7 PoE-
8 PoE- 8 PoE-