Filter
Top Products
Novell NetWare Server Driver 2-13
For example, if the server uses Ethernet_802.2, the
workstation must also use Ethernet_802.2.
The values <net1> and <net2> are unique numbers
assigned by the network administrator to each NIC. Make
sure that <net1> and <net2> are different numbers.
See the appropriate Novell NetWare manuals for further
information.
Follow these steps to verify the PCI slot number that the
NIC is installed in:
1 Reboot to a DOS prompt.
2 Insert EtherDisk diskette 1 in drive A, change to the
A:\> prompt, and enter:
3c90xcfg.exe
The Selected NIC screen of the Configuration and
Diagnostic Program is displayed, as shown in Figure 2-1.
Figure 2-1 Selected NIC Screen of the Configuration and
Diagnostic Program
3 Check the slot number in the Selected NIC panel on
the screen.
The slot value that appears in the Selected NIC panel must
match the slot value entered in the load line of the
AUTOEXEC.NCF file.