Filter
Top Products
10
Operation (Continued)
4. Manually turn tape roll to create slack tape while
pulling threading needle through tape applying
mechanism until needle is through and the tape
aligns with the applying roller.
5. Excess tape may be cut with a scissors at the
applying roller as shown in Figure 3-5.
3. Place tape roll on tape drum to dispense tape
with adhesive side forward. Seat tape roll fully
against back flange of drum. Attach tape lead
end to threading needle as shown in Figure 3-4.
Figure 3-5—Cut Excess Tape
Figure 3-4—Tape Loading and Threading
• To reduce the risk associated with sharp
blade hazards:
− Keep hands and fingers away from tape
cutoff blades under orange blade guards.
The blades are extremely sharp.
WARNING