Filter
Top Products
13.11.1 Taping Heads
13-MAINTENANCE AND REPAIRS (continued)
31
TAPE WEB ALIGNMENT – Manual 2
TAPE DRUM FRICTION BRAKE – Manual 2
APPLYING MECHANISM SPRING – Manual 2
ONE-WAY TENSION ROLLER – Manual 2
TAPE LEG LENGTH
Leading Tape Leg Length Adjustment – Manual 2
Changing Tape Leg Length from 70 to 48mm [2-3/4 to 2 inches] – Manual 2
Note – Changing tape leg to 48mm [2 inches] requires machine adjustment also. See
"Special Set-Up Procedure – Changing Tape Leg Length".
Taping Head Adjustments
• To reduce the risk associated with sharp blade hazards:
− Keep hands and fi ngers away from tape cutoff blades under orange blade guards. The blades
are extremely sharp
WARNING
13.11 Special Set-Up Procedure
WARNING
2010 December
800ab-NA
• To reduce the risk associated with mechanical and electrical hazards:
− Turn electrical and air supply off and disconnect before performing any adjustments,
maintenance, or servicing the machine or taping heads