Filter
Top Products
© 3M 2008. All Rights Reserved. 39
3M™ Digital Projector DX70i Appendices
Message
Power-LED
Temp-LED Lamp-LED
(Green) (Red)
Standby State
(Input power cord)
Warming Flashing
Normal Mode
Cooling Flashing
Error (Lamp failed)
Error (Fan failed) Flashing
Error (Over Temp.)
Problem: Image is out of focus
Adjust the Focus Ring on the projector lens.
Make sure the projection screen is between distance 3.3 to 40.0
feet (1.0 to 12.2 meters) from the projector. (see page 15)
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed
Select “Management Ö Projection” from the OSD and adjust the
projection direction. (see page 28)
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp”.
(see page 41)
Problem: LED lighting message
Steady light
>
No light
>