3M™ Mobile Projector MP300
14 © 2012 3M. All Rights Reserved.
Getting Started
In the following section, charge the projector's battery, and turn on the projector.
Power Adapter
The power adapter is used to charge the battery or power the projector. There are four
outlet adapters. When the power adapter is first shipped, it is fitted with a blank outlet
adapter. This must be removed before installing an outlet adapter.
Installing an Outlet Adapter
1 Press the "PUSH" button on the underside of the power adapter.
2 Remove the blank outlet adapter by sliding up.
3 Select the outlet adapter that will plug into your wall outlet and align to the power
adapter.
4 Slide the outlet adapter down until it clicks into place.