3M MP300 Projector User Manual


 
3M™ Mobile Projector MP300
24 © 2012 3M. All Rights Reserved.
Remote Control
The 3M remote control controls the projector, or any MHL enabled device plugged into
the projector.
Remove Protective Film
Before you can begin using the remote control, you must remove the protective film
from the battery compartment. Remove the film as shown below.
Using the Remote
When using the remote control, point the remote control's infrared transmitter at the
receiver on the projector. Sometimes you can control the projector by pointing the
remote at the surface in front, beside, or above the projector. The remote control's
range is up to 20 feet.
Note: Sun light and some indoor lighting may reduce the range of the remote control.