3M™ Mobile Projector MP300
16 © 2012 3M. All Rights Reserved.
• Do not store the projector when it is fully discharged. It will lose the ability to
charge.
Turning on and off the Projector
Press the power button on the projector to turn on the projector. After the projector is
powered on for the first time, you use the power button the projector or remote control
to turn the projector on and off.
MHL-enabled device such as a smartphone receives power from the projector. You can
turn off the projector's lamp without turning off the MHL-enabled device. The Lamp On
and Off button is on the remote control.
Turning the Projector On:
Press the power button on the projector or remote control.
Note: Some devices that receive their power from the projector and might take 30
seconds or more to become ready to use.
Turning the Projector Off: Press and hold the power button until the projector turns
off.
Turning the Lamp On and Off: You can turn the projector's lamp off without turning
the projector off by pressing the lamp button on the remote control. The projector lamp
will turn off immediately while the cooling fans continue to run.