Filter
Top Products
20
English
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
Turning Your Projector On
NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The
Power button light blinks blue until pressed.
Connect the power cord with AC adapter and appropriate signal cables to the projec-
tor.
Press the Power button.
Turn on your source (computer, DVD player, etc).
Connect your source to the projector using the appropriate cable.
By default, the input source of the projector is set to VGA. Change the input source of
the projector if necessary.
If you have multiple sources connected to the projector, press the Source button on
the remote control or control panel to select the desired source.
Turning Your Projector Off
Press the Power button. Follow the instruction displayed on screen to properly turn
off the projector.
Press the Power button again. The cooling fans continue to operate for 120 seconds.
To power off the projector quickly, press the Power button and hold for 1 second
while the projector’s cooling fans are still running.
Disconnect the power cord and AC adapter from the electrical outlet and the projec-
tor.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
Turning On/Off the Projector
NOTE: The “Press Power Button to Turn off Projector” message will appear on the screen. The
message disappears after 5 seconds or you can press the Menu button to clear it.
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal tempera-
ture to stabilize.