33
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
English
Password
When password protect is enabled, a password protect screen requesting you to
enter a password will be displayed when the power plug is inserted into the electrical
outlet and the power for the projector is rst turned on. By default, this function is
disabled. You can enable this feature by selecting Enabled. If the password has been
set before, key in the password rst and select the function.
This password security feature will be activated the next time you turn on the
projector. If you enable this feature, you will be asked to enter the projector's
password after you turn on the projector.
1. First time password input request:
a. Go to Power menu, press and then select Password to enable the
password settings.
b. Enabling the Password function will pop up a change screen. Key in a 4-digit
number from the screen and press .
c. To conrm, enter the password again.
d. If the password verication is successful, you may resume with accessing the
projector's functions and its utilities.
2. If you have entered an incorrect password, you will be given another two chances.
After three invalid attempts, the projector will automatically turn off.
NOTE: If you forget your password, contact 3M™ or email meetings@mmm.com.
3. To disable the password function, select the Disable option to close the function.
4. To delete the password, select the Delete option.