Filter
Top Products
45
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
English
Problem Possible Solution
The image is stretched
when displaying a 16:9
DVD
The projector automatically detects the input signal
format. It will maintain the aspect ratio of the projected
image according to input signal format with an Original
setting.
If the image is still stretched, adjust the aspect ratio
in the Display settings of the Advanced menu in the
OSD.
Error LED is blinking
amber
A projector fan has failed and the projector will auto-
matically shut down.
TEMP LED is solid
amber
The projector has overheated. The display automati-
cally shuts down. Turn the display on again after the
projector cools down. If the problem persists, contact
3M™.
TEMP LED is blinking
amber
If the projector fan fails, the projector will automatically
shut down. Clear the projector mode by pressing and
holding the Power button for 10 seconds. Please wait
for about 5 minutes and try to power up again. If the
problem persists, contact 3M™.
The remote control is
not operating smoothly
or works only within a
limited range
The battery may be low. Check if the LED indication
from the remote is too dim. If so, replace with a new
CR2025 battery.