Filter
Top Products
14 3M Multimedia Projector MP8620 3M 1997
11.
Install the new lamp
(3M Part Number 78-6969-8424-0)
by pushing down on the ends of the lamp
(8)
with equal pressure. Take care to correctly align the lamp with the bubble
(8a)
facing upward
(see figure 6-3).
Important Note
Do not touch lamp glass with fingers. Hold lamp by
the metal ends only.
.
12.
Fold the lamp housing
(6)
into the closed position until the lock tab
(5)
secures it.
13.
Insert the lamp access door
(1)
and slide it closed to engage the lock tab
(3)
.
14.
Insert the two screws
(2)
.
Figure 6-3. Replacing the Lamp
15.
Replace the air filter (included in the lamp kit). See Section 7-1.
Important Note
Always change the air filter when the lamp is
replaced. When you order a metal halide lamp, it
comes in a kit which includes an air filter.