Filter
Top Products
25
2. Equipment connection and network setting
2.5.3 Port Settings
Displays and confi gures communication port settings.
Click the [Apply] button to save the settings.
• The new confi guration settings are activated after restarting the
network connection. The network connection must be restarted when the
confi guration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.
NOTE
Item Description
Network Control Port1
(Port:23)
Confi gures command control port 1 (Port:23).
Port open Click the [Enable] check box to use port 23.
Authentication
Click the [Enable] check box when authentication is required
for this port.
Network Control Port2
(Port:9715)
Confi gures command control port 2 (Port:9715).
Port open Click the [Enable] check box to use port 9715.
Authentication
Click the [Enable] check box when authentication is required
for this port.
SNMP Port Confi gures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address Confi gures the destination of the SNMP Trap in IP format.
SMTP Port Confi gures the SMTP port.
Port open Click the [Enable] check box to use the e-mail function.
2.5 Confi guring and controlling the projector via a web browser (Continued)