Filter
Top Products
8e6 ProxyBlocker Quick Start Guide 33
Network: LAN Settings
From the navigation panel, click Network and choose LAN Settings from the pop-up
menu:
Make the following entries for the ProxyBlocker in the LAN Settings window:
A. Enter the Host Name that includes your domain name, for example PBASERVER.
myserver.com (the NetBIOS name must be capitalized). It is important to enter
something identiable, because once the product is registered, this host name is
used by 8e6 Technologies to recognize your account for library updates. This name
needs to be a valid DNS entry.
B. Enter the LAN1 IP address and specify the subnet for LAN 1, the ProxyBlocker’s rst
Ethernet Network Interface Card (NIC).
You may use a non-routeable IP address for the listening interface and a subnet
mask of 255.255.255.255 (32 bites).
C. Enter the LAN2 IP address and subnet for LAN 2, the ProxyBlocker’s second Ether-
net NIC. The subnet selection is usually 255.255.0.0 (16 bites) or 255.255.255.0 (24
bites), but cannot be 255.255.255.255 (32 bites).
D. Enter the Primary IP address of the rst DNS name server. The ProxyBlocker uses
this name server to resolve the domain name requested by users from the LAN.