Filter
Top Products
CHAPTER 4: LDAP AUTHENTICATION SETUP SET UP LDAP DOMAIN GROUPS, MEMBERS
8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE 153
Fig. 4-21 Upload Member Profile File window
3. Click Browse to open the Choose file window.
4. Select the file to be uploaded.
WARNING: Any file uploaded to the server will overwrite the
existing user/group profile file.
Each user/group profile in the file uploaded to the server
must be set up in a specified format in order for the
profile to be activated on the server. This format differs
depending on whether the profiles are user or group
profiles. Based on the type of file format used, the file
should have the following name:
• ldapuserprofile.conf if the file contains LDAP user
profiles
• ldapgroupprofile.conf if the file contains LDAP group
profiles
NOTE: See Appendix A: User/Group File Format and Rules for
examples of valid filtering profile formats to use when creating a
list of profiles to be uploaded to the server.
WARNING: When uploading a list of profiles to the tree, the user
will be blocked from Internet access if the minimum filtering level
has not been defined via the Minimum Filtering Level window. If
you have just established the minimum filtering level, filter
settings will not be effective until the user logs off and back on the
server.