8e6 Technologies TAR 1.0 Network Card User Manual


  Open as PDF
of 54
 
28 8e6 ThreaT analysis reporTer Quick sTarT Guide
System Status Screen
The System Status screen contains the following information:
LAN1 (eth0) interface for web access and R3000 communications: LAN1 (eth0)
IP address and netmask specied in screen 3 (Congure Network Interface), and
current status (“Active” or “Inactive”)
LAN2 (eth1) interface for bandwidth monitoring: LAN2 (eth1) IP address and
netmask specied in screen 4 (Congure Network Interface), and current status
(“Active” or “Inactive”)
Default gateway IP address specied in screen 5 (Congure default gateway)
Congure host name specied in screen 7 (Congure Host Name)
DNS server IP address(es) specied in screen 6 (Congure Domain Name Servers)
Current status of the Threat Analysis Reporter
Current Version of the Threat Analysis Reporter software
NOTE: Modications can be made at any time by returning to the specic
screen of the wizard.
Log Off, Disconnect the Peripherals
A. After completing the wizard setup procedures, return to the System Conguration
screen and press 9 to log out.
B. Disconnect the peripherals from the Threat Analysis Reporter.
•
•
•
•
•
•
•
 previous next