Filter
Top Products
Hardware Installation
SY- P4I865PE Plus DRAGON 2
38
Onboard LAN LED Definition
Step 5 Power On
You have now completed the hardware installation of your Motherboard
successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the system is
performing the diagnostic checks,
Note: If you have failed to enter the BIOS, wait until the boot up
sequence is completed. Then push the RESET button and press
<DEL> key again at the beginning of boot-up, during diagnostic
checks.
When this LED is lit, this
means the LAN is
running at 100 mbps, if i
t
is not lit, the Onboard
LAN is working at 10
mbps.
This is the LAN activit
y
LED. It will blink whe
n
it is active.