Filter
Top Products
BIOS Setup 3-11
3-4. Integrated Peripherals
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Integrated Peripherals
► OnChip IDE Device Press Enter Item Help
► OnChip PCI Device Press Enter
► SuperIO Device Press Enter
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
# OnChip IDE Device:
Click <Enter> key to enter its submenu:
Phoenix – Award WorkstationBIOS CMOS Setup Utility
VIA OnC DE Device hip I
Onboard SATA Mode Select IDE Item Help
IDE DMA transfer access Enabled
OnChip IDE1 Controller Enabled
OnChip IDE2 Controller Enabled
IDE Prefetch Mode Enabled
IDE HDD Block Mode Enabled
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard SATA Mode Select:
This item selects the mode of Serial ATA.
IDE DMA transfer access:
This item selects the DMA mode for devices connected through IDE channels.
On-Chip IDE1/IDE2 Controller:
This item allows you to enable or disable the primary (IDE1) and secondary (IDE2) IDE controller. Select
[Disabled] if you want to add a different hard drive controller.
User’s Manual