Filter
Top Products
F8-x86_64 on the Acer Ferrari 3400LMi
# /sbin/modprobe irtty-sir 2>/dev/null
/sbin/modprobe irnet 2>/dev/null
setserial /dev/ttyS1 uart none
daemon /usr/sbin/irattach ${DEVICE} ${ARGS}
...
That is about it, You are done with the configuration.
14.2 Testing IrDA
Now start the IrDA service and watch the system log. Hopefully, you should see
something similar the the following:
# service irda start
Starting IrDA: [ OK ]
# dmesg | tail
...
ttyS1: LSR safety check engaged!
pnp: Device 00:09 activated.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
This verifies that you have got the proper modules in place. The last step is to
verify that we are able both of transmitting and receiving traffic. So activate IR on
the remote device, e.g. your phone, and place the two IR-ports eye-to-eye. Then
do a dump of the traffic:
# irdadump -i irda0
...xid:cmd 62a9cc0d > ffffffff S=6 s=5 (14)
...xid:cmd 62a9cc0d > ffffffff S=6 s=* redneck hint=0400 [ Computer ]
(23)
...xid:cmd ffffffff < 6f700c8d S=1 s=0 (14)
...xid:rsp 62a9cc0d > 6f700c8d S=1 s=0 redneck hint=0400 [ Computer ]
(23)
...xid:cmd ffffffff < 6f700c8d S=1 s=* P900 hint=9325 [ PnP PDA/Palmtop
Modem Telephony IrCOMM IrOBEX ] (21)
You're all set! The first I did after this was to use irobex_palm3 <SIS-file> to
upload and install GnuBox and some other programs on my phone. To do this
you need to have the openobex and openobex-apps packages installed and your
phone must supports the OBEX protocol. Pretty neat!
15 Modem
The Ferrari 3400 has a Smart Link soft modem installed. After the Ferrari 3400
was produced Smart Link was acquired by Conexant. Conexant has a strange
policy when it comes to providing drivers for it products. Linux drivers are not
38