Filter
Top Products
Chapter 3 45
Removing the Keyboard
1. See “Removing the Battery Pack” on page 38.
2. Use a plastic flat-blade screwdriver to push the latches on the top side of the keyboard.
3. Raise the top of the keyboard slightly, then carefully slide it toward LCD panel to release the keyboard
retaining tabs from the upper case.
4. Flip the keyboard over onto the touchpad area to access the keyboard cable.
5. Open the keyboard cable connector, then disconnect the cable.
Removing the Upper Case
1. See “Removing the Battery Pack” on page 38.
2. See “Removing the Back Cover” on page 39.
3. See “Removing the Hard Disk Drive Module” on page 39.
4. See “Removing the DIMM Modules” on page 41.
5. See “Removing the WLAN Module” on page 41.
6. See “Removing the Optical Drive” on page 44.
7. See “Removing the Keyboard” on page 45.