Filter
Top Products
62 Chapter 3
6. Disconnect the LCD-webcam cable from the LCD PCB.
Removing the LCD Hinges
1. Perform the “Removing the LCD Panel” procedure on page 61.
2. Remove the four screws (B) securing the left and right LCD hinges, then remove the LCD hinges from the
LCD case.
Removing the Webcam Module
1. Perform the “Removing the LCD Hinges” procedure on page 62.
2. Disconnect the CCD board cable.
3. Pry loose the webcam module from the LCD case to remove it.
NOTE: The webcam module is glued to the LCD case. Remove the module only if it is defective.
Type Quantity Color Torque Part Number
M2 x L3 4 Black 1.6 kgf-cm 86.00F80.723