Filter
Top Products
Chapter 2 23
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press m during POST (when "Press <F2> to enter Setup" message is prompted on
the bottom of screen)..
Press F2 to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
Phoenix TrustedCore Setup Utility
Information Main Advanced Security Boot Exit
CPU Type:
Genuine Intel (R)® CPU Xxxx
CPU Speed: XXXX GHz
IDE0 Model Name: TOSHIBA
MK3018GAP-(PM)
(Note)
IDE0 Serial No: Y2554027T
(Note)
ATAPI Model Name Slimtype DVD-ROM
LSD-081-(SM)
System BIOS Version: V1.00
VGA BIOS Version: ATI M9+XC V0.1
Serial Number: xxxxxxxxxxxxxxxxxxxx 22 Byte
Asset Tag Number: 32 Byte
Product Name: TravelMate xxxx 16 Byte
Manufacturer Name: Acer 16 Byte
UUID: xxxxxxxxxxxxxxxx 16 Byte
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup defaults
Esc Exit ←→ Select Menu Enter Select4Sub-Menu F10 Save and Exit
System Utilities
Chapter 2