Filter
Top Products
Chapter 2 43
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
Information Main Advanced Security Boot Exit
UUID: XXXXXXXXXX
KLIJ
:Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:Exit
F1: General Help F5: Previous Values F7: Optimized Defaults
Serial Number XXXXXXXXXX
Asset Tag Number XXXXXXXXXX
Product Name TravelMate XXXX
Manufacturer Name Acer Inc.
System BIOS Version V1.0
VGA BIOS Version ATI M9+XC V0.1
ATAPI Model Name Slimtype DVD-ROM LSD-081-(
S
IDE0 Serial Number: TSST CorpCD
IDE1 Model Name: MK3018GAP-(PM)
IDE1 Serial Number: Y2554027T
Menu Level
X
IDE0 Model Name: Intel Raid0
Phoenix TrustedCore Setup Utility
CPU Type: Genuine Intel ® CPU
Help Item
CPU Speed: XXXXGHz
System Utilities
Chapter 2