Filter
Top Products
Chapter 2 47
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed
with 24-hour format
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date Format MM/DD/YYYY
(month/day/year)
System Memory This field reports the memory size of the system.
Memory size is fixed to 640MB
Extended Memory This field reports the memory size of the
extended memory in the system
(Extended Memory size=Total memory size-
1MB)
Video Memory Shows the VGA memory size
Quiet Boot Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled
Enabled: Customer Logo is displayed, and
Summary Screen is disabled
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled
Option:
Enabled or Disabled
Network Boot Enables or disables the system boot from LAN
(remote server)
Option:
Enabled or Disabled
F12 Boot Menu Enables or disables Boot Menu during POST.
Enabled: During quite boot, the OEM POST
screen displays Press <F12>Change Boot
Device
Disabled: During quite boot, the OEM POST
screen does not display Press <F12>Change
Boot Device
Note: This Boot device change is applies to
next boot only.
Option:
Disabled or Enabled
D2D Recovery Enables or disables D2D Recovery function. The
function allows the user to create a hidden
partition on hard disc drive to store operation
system and restore the system to factory defaults
Option:
Enabled or Disabled