Filter
Top Products
Chapter 2 31
Main
The Main screen displays a summary of your computer hardware information, and also includes basic setup
parameters. It allows the user to specify standard IBM PC AT system parameters.
NOTE: The screen above is for your reference only. Actual values may differ.
IDE0 Serial Number The field shows the Serial number of HDD installed on Primary
IDE master.
ATAPI Model Name
The field shows the Model name of ATAPI.
System BIOS version Displays system BIOS version.
VGA BIOS Version This field displays the VGA firmware version of the system.
Serial Number This field displays the serial number of this unit.
Asset Tag Number This field displays the asset tag number of the system.
Product Name This field shows product name of the system.
UUID Number This will be visible only when an internal LAN device is
presenting.
UUID=32bytes
Parameter Description
InsydeH2O Setup Utility Rev. 3.0
Information Main Advanced Security Boot Exit
Item specific Help
System Time: [09:00:00] <Tab>, <Shift-Tab>, or
System Date: [01/01/2003] <Enter> selects field
Total Memory [xxxxMB]
Video Memory: [XMB]
Graphic mode [Switchable]
Quiet Boot: [Enabled]
Network boot: [Enabled]
F12 Boot Menu: [Disabled]
D2D Recovery: [Enabled]
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup defaults
Esc Exit ←→ Select Menu Enter Select4Sub-Menu F10 Save and Exit