Filter
Top Products
Chapter 3 57
Disassembling the LCD Module
1. Remove the four LCD screw caps.
2. Then remove the four screws that secure the LCD bezel.
3. Detach the LCD bezel carefully.
4. Tear off the tape fastening the bluetooth antenna.
5. Then remove the bluetooth antenna from the LCD bezel.
6. Then disconnect the LCD inverter cable.
7. Remove the auxiliary wireless antenna.
8. Pull out the main wireless antenna, LCD coaxial cable and inverter cable.
9. Remove the two screws holding the inverter.
.
10. Disconnect the inverter cable then remove the inverter.
11. Remove the four screws that secure the LCD to the LCD panel; two on each side.
12. Take out the LCD from the LCD panel.