Filter
Top Products
62 Chapter 3
Assemble the Hinge Caps
1. Rotate the LCD module clockwise 135 degree. Press down the LCD module as picture shows.
2. Place the front hinge cap back to its original position.
3. Press the front hinge cap until you hear a click.
4. After attach the front hinge cap, erecat the LCD module as picture shows.
5. Rotate the LCD module counter-clockwise 90 degree. Then press down the LCD module a little bit.
6. Place the back hinge cap back the unit as picture shows.
7. Press down the back hinge cap until you hear a click.