Filter
Top Products
BIOS Utility
Chapter 5 Software 89
Onboard Devices Configuration
The Onboard Devices Configuration screen contains
parameters settings for your hardware connection devices.
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Caution: The parameters in this screen are for
advanced users only. You do not need to change the
values in this screen because these values are
already optimized.
Parameter Description
Serial Port Enables or disabled the serial port.
Options: Enabled or Disabled
Base Address Sets the I/O address of the serial port.
Options: 3F8h, 2F8h, 3E8h or 2E8h
IRQ Sets the interrupt request of the serial port.
Options: 4 or 11
500-e.book : 500-5e.fm Page 89 Monday, August 17, 1998 9:36 PM