Filter
Top Products
Error Messages
Chapter 6 Troubleshooting 101
Error Messages
If you receive an error message, note the message and take
the corrective action. The following table lists the error
messages in alphabetical order together with the
recommended course of action.
Error Messages Corrective Action
CMOS Battery Bad Contact your dealer or an authorized
service center.
CMOS Checksum Error Contact your dealer or an authorized
service center.
Disk Boot Failure Insert a system (bootable) diskette in
the floppy drive (A:), then press Enter
to reboot.
Diskette Drive
Controller Error or No
Controller Present
Contact your dealer or an authorized
service center.
Diskette Drive Error Contact your dealer or an authorized
service center.
Diskette Drive Type
Mismatch
Press F2 (during POST) to enter the
Setup Utility; then press Esc to exit and
reconfigure the computer.
Equipment
Configuration Error
Press F2 (during POST) to enter the
Setup Utility; then press Esc to exit and
reconfigure the computer.
Hard Disk 0 Error Contact your dealer or an authorized
service center.
Hard Disk 0 Extended
Type Error
Contact your dealer or an authorized
service center.
I/O Parity Error Contact your dealer or an authorized
service center.
500-e.book : 500-6e.fm Page 101 Monday, August 17, 1998 9:36 PM