Filter
Top Products
45
Installing expansion cards
There are two kinds of expansion slots available in this system board.
These are 32-bit PCI (Peripheral Component Interconnect) and 64-bit
PCI.
To install expansion cards:
1 Locate an empty expansion slot on the system board.
2 Remove the metal bracket located opposite the empty expansion
slot using a Phillips screwdriver.
3 Insert an expansion card into the slot. Make sure that the card is
properly seated.
bb411/cppl!!Qbhf!56!!Uivstebz-!Kbovbsz!34-!3114!!3;3:!QN