Filter
Top Products
37
Opening the server
Caution: Before you proceed, make sure that you have turned off
the system and all peripherals connected to it. Read the
“Pre-installation instructions” section on page 36.
You need to open the server before you can install upgrade
components. The front bezel and (left) side panel are removable to
allow access to the server’s internal components. Refer to the following
sections for instructions.
Removing the side panel
1 Perform the pre-installation instructions described on page 35.
2 Remove the side panel.
(1) Remove the two screws located on the rear edge of the
side panel.
(2) Press the side panel release button.
(3) Slide the side panel toward the rear of the chassis to
disengage it.