Filter
Top Products
59
Caution: Do not discard the slot cover. If the expansion card is
removed in the future, the slot cover must be reinstalled to
maintain proper system cooling.
Remove the expansion card from its protective packaging,
handling it by the edges.
(3) Insert the card into the selected slot.
Make sure that the card is properly seated.
(4) Press the release latch to secure the card in place.
(5) Connect the necessary cables to the expansion card as
required.
5 Observe the post-installation instructions described on page 36.
When you turn on the system, the BIOS setup automatically
detects and assigns resources to the new device (applicable only to
Plug-and-Play expansion card).