Filter
Top Products
30 Chapter 2
Disk Drives
Select Disk Drives from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
The following table describes the parameters found in this menu. Settings in
boldface
are the default and
suggested settings.
Parameter Description Options
Diskette Drive A / B Allows you to configure your floppy drive None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44 MB, 3.5-inch
2.88 MB, 3.5-inch
IDE Primary Channel Master Allows you to configure the hard disk drive
connected to the master port of IDE channel 1.
IDE Primary Channel Slave Lets you configure the hard disk drive connected
to the slave port of IDE channel 1.
IDE Secondary Channel Master Allows you to configure the hard disk drive
connected to the master port of IDE channel 2.
IDE Secondary Channel Slave Lets you configure the hard disk drive connected
to the slave port of IDE channel 2.
Disk Drives
Diskette Drive A ....................................................[1.44MB 3.5-inch]
Diskette Drive B ....................................................[None]
!
IDE Primary Channel Master
!
IDE Primary Channel Slave
!
IDE Secondary Channel Master
!
IDE Secondary Channel Slave