Filter
Top Products
13
Turning On Your System
After you have connected all peripherals and cables, follow these
steps to turn on your computer:
1. Turn on all peripherals connected to the system such as
monitor, printer, etc.
2. Turn on the main power switch located at the back of the
system.
Note: If your system needs a SmartCard to power on, then insert the
SmartCard into the slot in front of the system. See your SmartCard manual for
more detail.
Caution: The SmartCard should be inserted correctly, the circuit chip should
be facing down and in front as shown below, for the system to power up
properly. See your SmartCard manual for more detail.
3. After inserting the SmartCard, the system will boot up and
the Acer logon screen will be displayed.
Wbt.book Page 13 Monday, August 2, 1999 4:07 PM