Acroprint V3 Clock User Manual


 
- 18 -
Note: The User ID (PIN number) is a 5 digit number. If you
input less than 5 digits the terminal pads the User ID with 0’s
in front of the User ID, i.e., if you enter 11 the User ID 00011 is
displayed on the terminal.
3) Input the User ID (range is 1 to 65534), press [OK].
The following appears:
4) You will be prompted to take (3) samples of your fingerprint.
If the test is successful three times in a row, the following
appears:
5) Press [OK], the previous message continues to be displayed
while the template is created. If your identity cannot be verified,
you are prompted to try again and you must restart the
verification procedure (Refer to Step 2).
New Enroll
00011-0
ESC OK (Save)
New Enroll
00011-0
Place Finger…
ESC/Exit
Note: 00011-0
The dash number (-0)
indicates the first
fingerprint.