Acroprint V3 Clock User Manual


 
- 45 -
Sleep: Set a time the terminal will go into sleep mode.
Pressing any button will awaken the terminal.
Idle: Select “SLP” or “OFF” for the Idle mode. “SLP” –
Sleep mode allows the terminal to be awakened by pressing
any key. “OFF” - Turns the unit off and the power button
must be pressed to turn the unit on.
Idle Min: Set how many minutes of no use before the
terminal goes into the selected “Idle” mode. Setting “Idle
Min” to “0” turns off this feature.
Bell Delay: Set the length of time the bell sounds. A setting
of 5 sets the bell to ring for 10 seconds. A setting of 10 sets
the bell to ring for 20 seconds.
Scheduled Bell: There are 20 bell schedules. Enter the times
you would like the bell to sound. The bell will sound at the
scheduled times for the duration set in the “Bell Delay”.
Lock Power: If set to “Y” the terminal cannot be turned off
using the power button. To turn the unit off with the power
button locked, enter the “Power Mng” menu and scroll down
to “Power Off”.