Filter
Top Products
19
Chapter 4 Advanced Setup
LAN IP Address
Selecting LAN IP
Address in the “Advanced Configuration” screen generates the
“LAN IP Address” screen. The value in the
LAN IP
Address text box is the IP
address of the Router as seen on the network.
The
LAN IP address of the Router can be modified, but Actiontec recommends
keeping the default factory setting (192.168.0.1).
☞
Note:Ifthe Router’s LAN IP Address is modified, verify the
DHCP Server range is within the same subnet. For more infor-
mation, see “DHCP Server Configuration.”
DHCP Server
Selecting DHCP Server in the “Advanced Configuration” screen generates the
“DHCP Server” screen. The Router has a built-in DHCP (Dynamic Host
Configuration Protocol) server that automatically assigns a different IP address to
each computer on the network, eliminating IP address conflicts.
The factory default setting is On.To disable the DHCP Server, select Off.