Filter
Top Products
9
Using the
Configuration Utility
Once the Adapters have been properly connected and installed, the user can further
configure the Adapters using the Actiontec MegaPlug Configuration Utility. The
Utility also provides information about the network. To access the Utility:
1. Click Start on the desktop, then Programs.
2. From the Programs menu, find “Actiontec MegaPlug,” then select MegaPlug
Configuration Utility.
The Utility appears on the desktop. See the following sections for more informa-
tion about the Utility’s capabilities.
Quick Setup
Selecting Quick Setup from the row of tabs near the top of the Utility’s window
generates the “Quick Setup” tab.
Use this tab to quickly set up security on all MegaPlug devices on the network.
3