Filter
Top Products
49
Result Codes:
KO1=n
RORREesiwrehtO
&Cn Data Carrier Detect (DCD) Control
Data Carrier Detect is a signal from the modem to your computer indicating that the
carrier signal is being received from a remote modem. DCD normally turns off when
the modem no longer detects the carrier signal.
dnammoCtceffE
0C&
simedometomerehtmorfreirracehtfoetatsehT
.nosyawlasitiucricDCD.derongi
1C&
langisreirracsmedometomerehtnehwnosnrutDCD
tonsilangisreirracehtnehwffodna,detcetedsi
.)tluafed(detceted
Result Codes:
KO1,0=n
RORREesiwrehtO
&Dn DTR Control
This command interprets how the modem responds to the state of the DTR signal
and changes to the DTR signal.
dnammoCtceffE
0D&
dnaRTDfosutatseurtehtserongimedomehT.erongI
ruoyfidesuebylnodluohssihT.nosyawlasatistaert
.medomehtotRTDedivorptonseodretupmoc
1D&
atadenil-nonielihwdetcetedtonsilangisRTDehtfI
KOseussi,edomdnammocsretnemedomeht,edom
.detcennocsniamerdna,edoctluser
2D&
atadenil-nonielihwdetcetedtonsilangisRTDehtfI
silangissihtfI.)tluafed(stcennocsidmedomeht,edom
.laidrorewsnatonlliwmedomeht,tneserpton
3D&
,srucconoitisnartffo-ot-nonanehwlangisRTDrotinoM
ZTAehtfisatesertfosasmrofrepmedomeht
.deviecersawdnammoc
Result Codes:
KO
,2,1,0=n
3
RORREesiwrehtO